Product List
Product Category
-
Terminal special equipment
-
Blast furnace hook
-
Special metallurgical equipment for torpedo tanks
-
Hot metal pretreatment
-
Special metallurgical equipment for converter
-
Special metallurgical equipment for electric furnace
-
Special metallurgical equipment for ladle
-
Special metallurgical equipment for refining furnace
-
Continuous casting equipment
-
Slag treatment
-
Special transport vehicle for steel mills
-
Radar antenna lodging system (other)
Smoke hood slag removal truck
Wireless remote control dust removal slag cleaning truck
2. Equipment overview: The fume hood slag remover is powered by a diesel engine to drive the main pump to provide pressure oil to each actuator for work. Equipped with work tools for dismantling operations, etc. Through the secondary arm, the working radius can be up to 13.5m. The working arm swings up 60° and swings down 30°, and the working tool swings up 10° and down 105° to meet the needs of the operation to the greatest extent.
設備概要:
3. Equipment features: Various control forms: wireless remote control, wired remote control and manual emergency operation. The GPS intelligent management system can remotely monitor the operation status of the equipment and diagnose faults through the network anytime, anywhere.
33. Wheeled:
2. Equipment overview: The equipment adopts a wheeled excavator, the swing angle of its swing arm is modified, and a wireless remote control system is added to carry out slag removal operations under the fume hood.
3. Equipment features: wireless remote control operation, large swing angle of the working tool, easy to remove the slag on the top of the hood. The wheeled excavation is convenient to move, and can walk on the pavement of the steel mill without damaging the road. The front of the equipment is equipped with a slag pusher for pushing slag, and the two sides are equipped with outriggers to travel to the working position and then lower the outriggers to perform a wide range of operations.
34. Crawler:
1. Setting place: KR suction hood, KR stirring paddle, RH, LF furnace
2. Equipment overview: The fume hood slag remover is used for slag removal in the flue and stirring paddle of the KR air suction port, and can also be used for slag removal in RH, LF furnaces and other places with high slag removal height requirements. It uses the diesel engine as the power to drive the main pump to provide pressure oil to each actuator for work, and is equipped with a hydraulic hammer tool for dismantling operations.
3. Equipment features: wireless remote control operation, can work in dangerous working environment to ensure personnel safety. The slag remover uses a two-stage lift arm with a high working height, especially suitable for high-height positions such as dust hoods and hoods.
Online Message
Free one-to-one product and solution consulting services
Contact Us
Contact: Mr. Liu
Mobile: 13809001565
Tel: 025-85096147
Fax: 025-85096148
E-mail: ljm@njydky.com
Address: No. 5, Jinhua Road, Guli Industrial Park, Jiangning District, Nanjing
Copyright © 2022 Nanjing Eaton Parker Heavy Industry Machinery Co., Ltd. All rights reserved. 苏ICP备19035244号-2 Powered by 300.cn
